|
|
|
National Stock Number:
5310-00-620-4012
Federal Supply Class:
5310
National Item Identification Number:
006204012
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 116B487H01 | 48306 | NORTHROP GRUMMAN SUPPORT SERVICES CORP | | 116B487H01 | 54372 | RIDGE ENGINEERING, LLC. | | C5078106-1 | 57958 | SIGNALS WARFARE PROJECT MANAGER | | 116B487H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.411 INCHES MAXIMUM | | LENGTH | 1.060 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | SPECIAL FEATURES | RADIUS 0.380 IN. ON ONE EDGE OF ONE BEARING SURFACE | | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL | | THICKNESS | 0.180 INCHES NOMINAL |
|
|