|
|
|
National Stock Number:
5310-00-622-6767
Federal Supply Class:
5310
National Item Identification Number:
006226767
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 1572424 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| COUNTERSINK ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM NUT | | CROSS-SECTIONAL SHAPE | ROUND NUT | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | FLANGE WIDTH ACROSS FLATS | 0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | FLANGE THICKNESS | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND B FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 202 OR STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.138 INCHES | | NUT DIAMETER | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|