|
|
|
National Stock Number:
5310-00-622-7427
Federal Supply Class:
5310
National Item Identification Number:
006227427
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 6-55097-6 | 17765 | THE BOEING COMPANY | | 6-55097-6 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | NORMALIZED | | HOLE DIAMETER | 0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 1.470 INCHES MINIMUM AND 1.490 INCHES MAXIMUM | | OVERALL HEIGHT | 0.280 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.955 INCHES MINIMUM AND 0.961 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES INNER | | SURFACE FINISH | 63.0 MICROINCHES OUTER |
|
|