|
|
|
National Stock Number:
5310-00-624-6714
Federal Supply Class:
5310
National Item Identification Number:
006246714
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 204-010-719-001 | 97499 | BELL TEXTRON INC | | 204-010-719-1 | 97499 | BELL TEXTRON INC | | 204-010-719-1 | D0216 | GENERAL ATOMICS AEROTEC SYSTEMS GMBH |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.180 INCHES NOMINAL | | DRIVE POINT DIAMETER | 0.186 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 4 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5000,COND C1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4340 OVERALL | | NOMINAL THREAD SIZE | 1.188 INCHES | | NUT DIAMETER | 1.730 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.350 INCHES NOMINAL | | SPECIAL FEATURES | 2 SIDES FLATTED,HOLE CONFIGURATION DRILLED PERPENDICULAR TO AND THRU DRIVE POINTS | | WIDTH ACROSS FLATS | 1.552 INCHES MINIMUM AND 1.564 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-S-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 97499-BPS 4075 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 18 |
|
|