|
|
|
National Stock Number:
5310-00-641-7066
Federal Supply Class:
5310
National Item Identification Number:
006417066
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 181732 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 181732 | 30201 | TREGO INC | | 181732 | 31633 | ALINABAL HOLDINGS CORPORATION | | 181732 | 51535 | CREST GOOD MANUFACTURING CO INC | | 181732 | 62224 | SATELLITE AEROSPACE, INCORPORATED | | 181732 | 77445 | RTX CORPORATION | | 181732 | JA269 | TOKYO JUDOI KOGYO K.K. | | 181732 | S0554 | TOKYO JUDOGI KOGYO CO. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM | | OVERALL DIAMETER | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4500 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
|
|