|
|
|
National Stock Number:
5310-00-655-6151
Federal Supply Class:
5310
National Item Identification Number:
006556151
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 0740796 | S3002 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH | | 824636-11 | 56232 | LOCKHEED MARTIN CORPORATION | | AU27AR301 | 10855 | CARRIER CORP | | AU27AR301-10855 | 19422 | DEMARKUS CORP REFRIGERATION ENGINEERING CORP | | MS35335-65 | 76Q65 | PUTNAM FARMS, INC. | | FF-W-100 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35335-65 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OR | | QQ-P-35,TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | FLAT EXTERNAL TEETH | | HOLE DIAMETER | 0.513 INCHES MINIMUM AND | | 0.530 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.880 INCHES MINIMUM AND | | 0.900 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.037 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-100 | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS35335-65 |
|