|
|
|
National Stock Number:
5310-00-680-7574
Federal Supply Class:
5310
National Item Identification Number:
006807574
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 45548 | 0EGF1 | CMP HYDRAULICS INC. | | 45548 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC | | 45548 | C0297 | GOODRICH CONTROL SYSTEMS GMBH |
|
Techincal Specification:
| THREAD SERIES | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 416F OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 39.0 ROCKWELL C MAXIMUM | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.132 INCHES MINIMUM AND | | 0.134 INCHES MAXIMUM | | BOSS DIAMETER | 0.240 INCHES MINIMUM AND | | 0.245 INCHES MAXIMUM | | BOSS THICKNESS | 0.066 INCHES MINIMUM AND | | 0.068 INCHES MAXIMUM | | NUT WIDTH ACROSS FLATS | 0.303 INCHES MINIMUM AND | | 0.315 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.050 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | ROUND NUT | | HEXAGONAL FLANGE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11599 | | DESIGN CONTROL REFERENCE | 45548 |
|
|