|
|
|
National Stock Number:
5310-00-680-9059
Federal Supply Class:
5310
National Item Identification Number:
006809059
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 19664-1 | 01359 | TRIUMPH THERMAL SYSTEMS - MARYLAND, INC. | | 19664-1 | 07KQ5 | DEFENSE & DEVELOPMENT ENTERPRISES LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.209 INCHES MINIMUM AND | | 0.215 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.996 INCHES MINIMUM AND | | 0.999 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.092 INCHES MINIMUM AND | | 0.093 INCHES MAXIMUM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 01359 | | DESIGN CONTROL REFERENCE | 19664-1 |
|
|