| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.682 INCHES MINIMUM AND 0.692 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MOUNTING HOLE DIAMETER | 0.200 INCHES NOMINAL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.00 DEGREES NOMINAL |
| MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE NUT SPACER |
| NUT LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| PLATE THICKNESS | 0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| PLATE WIDTH | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| THRU-HOLE DIAMETER | 0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |