|
|
|
National Stock Number:
5310-00-735-5412
Federal Supply Class:
5310
National Item Identification Number:
007355412
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| B2276B | 7PZX0 | FAIRBANKS MORSE, LLC | | B2276B | 82796 | COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE | | NAS42HT6-2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | PW515 | 22888 | FMC CORP | | PW515 | 90785 | PEERLESS PUMP A TBG INC CO | | SKA5023 | 88907 | BRUNSWICK CORP | | WPP2606 | 79172 | SIEMENS WATER TECHNOLOGIES CORP. DIV WALLACE & TIERNAN PRODUCTS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.031 INCHES NOMINAL |
|
|