|
|
|
National Stock Number:
5310-00-737-4321
Federal Supply Class:
5310
National Item Identification Number:
007374321
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 6760342 | 24617 | GENERAL MOTORS CORP | | 7374321 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| THREAD SERIES | UN | | NOMINAL THREAD SIZE | 1.688 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1137 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM | | NUT DIAMETER | 2.615 INCHES MINIMUM AND | | 2.635 INCHES MAXIMUM | | NUT THICKNESS | 0.318 INCHES MINIMUM AND | | 0.338 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 1 TAPPED | | HOLE NOMINAL THREAD DIAMETER | 0.190 INCHES | | HOLE THREAD QUANTITY PER INCH | 24 | | COUNTERSINK ANGLE | 89.0 DEGREES MINIMUM AND | | 91.0 DEGREES MAXIMUM NUT |
|
|