|
|
|
National Stock Number:
5310-00-737-4476
Federal Supply Class:
5310
National Item Identification Number:
007374476
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 6764543 | 24617 | GENERAL MOTORS CORP | | 7374476 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.094 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE THREAD QUANTITY PER INCH | 24 | | HOLE TYPE AND QUANTITY | 6 TAPPED | | HOLE NOMINAL THREAD DIAMETER | 0.190 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | NOMINAL THREAD SIZE | 1.766 INCHES | | NUT DIAMETER | 2.516 INCHES MINIMUM AND 2.536 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | SMALL END DIAMETER | 1.969 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-12968,TY A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD PITCH DIAMETERS | +1.7309 TO 1.7354 INCHES | | THREAD SERIES | UNS | | UNDERCUT THICKNESS | 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
|
|