|
|
|
National Stock Number:
5310-00-738-7536
Federal Supply Class:
5310
National Item Identification Number:
007387536
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10945257 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 1229W1557 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 1229W1557 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 2387006 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 2387006 | 7X677 | GENERAL MOTORS LLC | | 25711R1 | 338X5 | ND DEFENSE LLC | | 4518FX | 45152 | OSHKOSH CORP | | 69790AX | 45152 | OSHKOSH CORP | | 69790AX | 75Q65 | OSHKOSH DEFENSE LLC | | 73019 | 95097 | LITTLE GIANT CRANE AND SHOVEL INC | | ESP-F-16.104-PP | 338X5 | ND DEFENSE LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CRITICALITY CODE JUSTIFICATION | FEAT | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.656 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 1.188 INCHES NOMINAL | | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL | | THICKNESS | 0.125 INCHES NOMINAL |
|
|