|
|
|
National Stock Number:
5310-00-741-6867
Federal Supply Class:
5310
National Item Identification Number:
007416867
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 19232P11 | 27618 | TAYLOR MACHINE WORKS INC | | 5310007416867 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5941545 | 24617 | GENERAL MOTORS CORP | | 5941545 | 73331 | GENERAL MOTORS CORP FISHER GUIDE DIV | | 7416867 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 50.0 ROCKWELL R NOMINAL | | HOLE DIAMETER | 0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM | | OVERALL DIAMETER | 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM | | MATERIAL | WOOL OR COTTON OR CELLULOSE OR GLASS OVERALL | | MINIMUM TENSILE STRENGTH | 8000 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
|
|