|
|
|
National Stock Number:
5310-00-752-8972
Federal Supply Class:
5310
National Item Identification Number:
007528972
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 7528972 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 3.438 INCHES NOMINAL NUT | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | ROUND NUT | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | FLANGE THICKNESS | 0.500 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 4.094 INCHES MINIMUM AND 4.156 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1335H OR STEEL COMP 8740H OVERALL | | NOMINAL THREAD SIZE | 3.375 INCHES | | NUT COUNTERBORE DEPTH | 0.312 INCHES NOMINAL NUT | | NUT DIAMETER | 3.750 INCHES MINIMUM AND 3.755 INCHES MAXIMUM | | NUT LENGTH | 1.062 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD SERIES | UN | | THREAD QUANTITY PER INCH | 16 |
|
|