|
|
|
National Stock Number:
5310-00-752-9196
Federal Supply Class:
5310
National Item Identification Number:
007529196
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 11645P11 | 27618 | TAYLOR MACHINE WORKS INC | | 2282809 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 233695 | 06853 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | | 2282809 | 24617 | GENERAL MOTORS CORP | | 2282809 | 7X677 | GENERAL MOTORS LLC | | 319960 | H0001 | DAF TRUCKS N.V. | | 7529196 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 543B1 | 56442 | DIAMOND REO TRUCK CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM | | HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 417 GRADE SB 415 BCF MIL STD SINGLE MATERIAL RESPONSE OVERALL | | OVERALL DIAMETER | 0.503 INCHES MINIMUM AND 0.523 INCHES MAXIMUM | | MATERIAL | RUBBER SYNTHETIC OVERALL | | MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.089 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
|