|
|
|
National Stock Number:
5310-00-753-4101
Federal Supply Class:
5310
National Item Identification Number:
007534101
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 092-06131-195-313-2 | 94697 | MOOG INC | | 10007353 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 2064209 | 28527 | L3HARRIS TECHNOLOGIES, INC. | | 2007T40P01 | 77264 | PHOENIX SPECIALTY MFG CO INC | | 2007T40P01 | 99207 | GENERAL ELECTRIC COMPANY | | 100168-168 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | CAV10-58P | 11871 | RECON/OPTICAL, INC. | | 355-122-0001 | 1K426 | MOOG INC. | | 2064209G001 | 28527 | L3HARRIS TECHNOLOGIES, INC. | | 547A003046 | 34228 | L3 TECHNOLOGIES, INC. | | 930716-2 | 80249 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 645074-3FU | 99551 | GOODRICH CORPORATION | | 355-122-0001 | 99932 | MOOG INC. | | 5800334-2100-001 | D8385 | THALES DEUTSCHLAND GMBH | | S8157N17-032 | 59364 | HONEYWELL INTERNATIONAL INC. | | CAV10-58P | 80294 | BOURNS INSTRUMENTS INC | | S8157N17-032 | 99193 | HONEYWELL INTERNATIONAL INC. | | PL38E45-9ASH2PC14 | 99551 | GOODRICH CORPORATION | | CAV10-58P | 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | OVERALL DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
|
|