|
|
|
National Stock Number:
5310-00-797-6126
Federal Supply Class:
5310
National Item Identification Number:
007976126
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10443968 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | AMS-QQ-A-250/5A | 0U583 | SAE INTERNATIONAL | | HS306-323 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | AMS-QQ-A-250/5A | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | FF-W-92B | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | HS306-323 | 8V613 | THE BOEING COMPANY | | SAE-AMS-QQ-A-250/5A | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.195 INCHES MINIMUM AND | | 0.206 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.545 INCHES MINIMUM AND | | 0.565 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.031 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | Y A; GR II GOVERNMENT STANDARD | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-92B | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 02731 | | DESIGN CONTROL REFERENCE | HS306-323 |
|
|