|
|
|
National Stock Number:
5310-00-799-9031
Federal Supply Class:
5310
National Item Identification Number:
007999031
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 5310PL0933683 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 539885 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 33.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.314 INCHES MINIMUM AND | | 0.321 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.970 INCHES MINIMUM AND | | 0.990 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.090 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | TOP RECESS DIAMETER | 0.388 INCHES NOMINAL | | BOTTOM RECESS DIAMETER | 0.388 INCHES NOMINAL | | BOTTOM RECESS ANGLE | 89.5 DEGREES MINIMUM AND | | 90.5 DEGREES MAXIMUM | | TOP RECESS ANGLE | 89.5 DEGREES MINIMUM AND | | 90.5 DEGREES MAXIMUM | | SPECIAL FEATURES | 0.18 INCH RADIUS ON BOTH BEARING SURFACES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 539885 |
|
|