|
|
|
National Stock Number:
5310-00-813-1938
Federal Supply Class:
5310
National Item Identification Number:
008131938
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| K674126-11 | 84955 | KAMAN AEROSPACE CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.250 INCHES NOMINAL | | DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.188 INCHES NOMINAL | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL NUT | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | NOMINAL THREAD SIZE | 1.125 INCHES | | NUT THICKNESS | 0.500 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 94955-AKPS-208 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 12 |
|
|