|
|
|
National Stock Number:
5310-00-813-1939
Federal Supply Class:
5310
National Item Identification Number:
008131939
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| K674069-11 | 84955 | KAMAN AEROSPACE CORPORATION | | K674069-15 | 84955 | KAMAN AEROSPACE CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.125 INCHES NOMINAL | | DRIVE POINT QUANTITY | 8 | | DRIVE POINT WIDTH | 0.320 INCHES NOMINAL | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE NOMINAL THREAD DIAMETER | 0.164 INCHES | | HOLE THREAD QUANTITY PER INCH | 32 | | HOLE TYPE AND QUANTITY | 9 TAPPED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | NOMINAL THREAD SIZE | 5.062 INCHES | | NUT DIAMETER | 5.750 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.400 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | KPS 537,CL 1,FSCM 84955 MFR REF ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | TIN AND CADMIUM OVERALL | | TEST DATA DOCUMENT | 84955-KPS208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | LEFT-HAND | | THREAD SERIES | UNS | | THREAD PITCH DIAMETERS | +5.0219 TO 5.0278 INCHES | | THREAD QUANTITY PER INCH | 16 |
|
|