|
|
|
National Stock Number:
5310-00-813-2037
Federal Supply Class:
5310
National Item Identification Number:
008132037
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 9809-109 | 13002 | GOODRICH CORPORATION | | 9809-109 | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-465 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.468 INCHES MINIMUM AND | | 0.478 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.690 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.059 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES TOP | | 32.0 MICROINCHES BOTTOM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 13002 | | DESIGN CONTROL REFERENCE | 9809-109 |
|
|