|
|
|
National Stock Number:
5310-00-815-5073
Federal Supply Class:
5310
National Item Identification Number:
008155073
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 32-50154-7 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| HOLE DIAMETER | 0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.011 INCHES MINIMUM AND 1.031 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OVERALL | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.672 INCHES MINIMUM AND 0.692 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED |
|
|