|
|
|
National Stock Number:
5310-00-815-9129
Federal Supply Class:
5310
National Item Identification Number:
008159129
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 48158 | 34228 | L3 TECHNOLOGIES, INC. | | 53658159129 | 21877 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | B6-8 | 00141 | ROLLER BEARING CO OF AMERICA, INC | | 8063772 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 957B048158 | 34228 | L3 TECHNOLOGIES, INC. | | 5710-37-30 | 86928 | SEASTROM MANUFACTURING CO INC | | PR45-08 | 08748 | ELDEC AEROSPACE CORP | | SS1-22 | 29440 | W. M. BERG INC | | DB6D8 | 29964 | ALLIED DEVICES CORP DBA ABSOLUTE PRECISION CO | | SM-C-772659-13 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | STD3835-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.188 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM |
|
|