|
|
|
National Stock Number:
5310-00-816-7669
Federal Supply Class:
5310
National Item Identification Number:
008167669
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 9809-91 | 13002 | GOODRICH CORPORATION | | 9809-91 | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| HOLE DIAMETER | 1.003 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-6940 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.060 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 1.103 INCHES NOMINAL | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|