|
|
|
National Stock Number:
5310-00-817-2393
Federal Supply Class:
5310
National Item Identification Number:
008172393
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 24-00058-008 | 00724 | RAYTHEON COMPANY | | 328C146C10C1 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 4912549-03 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 635A938H05 | 48306 | NORTHROP GRUMMAN SUPPORT SERVICES CORP | | 4912549-03 | 90536 | LOCKHEED MARTIN CORP | | 328C146C10C1 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 9146998 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 835997 | 19203 | PICATINNY ARSENAL | | 835997-00 | 32345 | DEFENSE REDUCTION AGENCY | | 635A938H05 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM | | OVERALL DIAMETER | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 HALF HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 11 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
|
|