|
|
|
National Stock Number:
5310-00-818-0628
Federal Supply Class:
5310
National Item Identification Number:
008180628
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| A51B21014-13 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B21014-13 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B21014-13 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 0.252 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.063 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.332 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|