|
|
|
National Stock Number:
5310-00-819-2930
Federal Supply Class:
5310
National Item Identification Number:
008192930
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 10121739 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5310PL0210313 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS9100-04 | 0U583 | SAE INTERNATIONAL | | MS9100-04 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | 938.02.92.104 | S4080 | PILATUS AIRCRAFT LTD | | 9380292104 | S4080 | PILATUS AIRCRAFT LTD | | MS9100-04 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9100-04 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS9100-04 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.047 INCHES NOMINAL | | BEARING SURFACE FINISH | 63.0 MICROINCHES | | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED | | COUNTERBORE DIAMETER | 0.603 INCHES MINIMUM AND 0.613 INCHES MAXIMUM NUT | | COUNTERSINK ANGLE | 105.0 DEGREES MINIMUM AND 115.0 DEGREES MAXIMUM NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5639 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD SIZE | 0.438 INCHES | | NUT COUNTERBORE DEPTH | 0.037 INCHES MINIMUM AND 0.047 INCHES MAXIMUM NUT | | NUT HEIGHT | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3B | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 20 |
|
|