|
|
|
National Stock Number:
5310-00-823-8804
Federal Supply Class:
5310
National Item Identification Number:
008238804
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10385717 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 120386 | 80195 | ED ETNYRE & CO | | 15172 | 04627 | HYSTER-YALE GROUP, INC. | | 15172 | 30076 | HYSTER-YALE GROUP, INC. | | 145-4510926B9 | 51563 | ROHR, INC. | | 20-1084-00 | 91051 | PARKER-HANNIFIN CORPORATION | | 51-1220-0002 | 04664 | PIERCE MANUFACTURING INC | | 2B154 | 07835 | BOEHME H O INC | | 410060087 | 3226A | RAFAEL | | 5310PL0352208 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 418171-9 | 96214 | RAYTHEON COMPANY | | 4197515-11 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 410060087 | S5652 | RAFAEL | | 5310008238804 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | F233 | 00365 | TLD ACE CORP | | MS27183-9 | 0158B | PSA PEUGEOT-CITROEN ESPANA, SA | | SK-1000-3 | 0EAK3 | GSE MANAGEMENT CO | | B4525-307-24 | 60532 | TRANE U.S. INC. | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | SPE-61-21 | 92392 | ALLIS-CHALMERS CORP | | 70026-9 | 95097 | LITTLE GIANT CRANE AND SHOVEL INC | | MS15795-9 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27183-9 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS2718309 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.245 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | OVERALL DIAMETER | 0.557 INCHES MINIMUM AND 0.577 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
|
|