|
|
|
National Stock Number:
5310-00-832-7120
Federal Supply Class:
5310
National Item Identification Number:
008327120
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1829N638 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 1829N638 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | QUENCHED AND TEMPERED | | HOLE DIAMETER | 0.906 INCHES NOMINAL | | OVERALL DIAMETER | 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1045 AND STEEL COMP 1046 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.125 INCHES NOMINAL |
|
|