|
|
|
National Stock Number:
5310-00-835-0574
Federal Supply Class:
5310
National Item Identification Number:
008350574
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 23MS35334-20 | 80045 | L3HARRIS CINCINNATI ELECTRONICS CORPORATION | | FF-W-100 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35334-20 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1050 OR | | STEEL COMP 1551 OR | | STEEL COMP 1059 OR | | STEEL COMP 1060 OR | | STEEL COMP 1561 OR | | STEEL COMP 1064 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | HOLE DIAMETER | 0.320 INCHES MINIMUM AND | | 0.332 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.590 INCHES MINIMUM AND | | 0.607 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.040 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND | | A GRADE AND | | 1 STYLE AND | | 1 COMPOSITION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-100 | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS35334-20 |
|