|
|
|
National Stock Number:
5310-00-847-2229
Federal Supply Class:
5310
National Item Identification Number:
008472229
Description:
NUT,SELF-LOCKING,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protusions, slots or splines in or on the periphery or in the face opposite the bearing surface. An integral feature is incorporated for locking on the threads of a mating member. Do not use if a more specific item name applies. Excludes COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; and TURNBUCKLE BODY.
|
Manufacturer Information:
| BACN10GR14 | 81205 | THE BOEING COMPANY | | BR7414-9212 | 72962 | HARVARD INDUSTRIES INC |
|
Techincal Specification:
| DRIVE POINT WIDTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.080 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM NUT AND 100.0 DEGREES MAXIMUM NUT | | NOMINAL THREAD SIZE | 5.740 INCHES | | NUT DIAMETER | 6.485 INCHES MINIMUM AND 6.505 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.491 INCHES MINIMUM AND 0.521 INCHES MAXIMUM | | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F MIL SPEC 1ST MATERIAL RESPONSE NUT | | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT | | MATERIAL | STEEL COMP 4130 NUT | | SMALL END DIAMETER | 6.234 INCHES MINIMUM AND 6.266 INCHES MAXIMUM | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 12 | | THREAD SERIES | UN | | UNDERCUT THICKNESS | 0.044 INCHES MINIMUM AND 0.106 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 81205-BACN10GR MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY Z,CL 4A MIL SPEC 2ND TREATMENT RESPONSE LOCKING INSERT | | SURFACE TREATMENT | PHOSPHATE ZINC LOCKING INSERT | | TEMP RATING | -75.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
|
|