|
|
|
National Stock Number:
5310-00-849-6895
Federal Supply Class:
5310
National Item Identification Number:
008496895
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 0424-21 | 07187 | HONEYWELL INTERNATIONAL INC. | | 0425-21 | 56232 | LOCKHEED MARTIN CORPORATION | | APR307AU5 | 18915 | PEP WEST, INC. DBA PENTAIR TECHNICAL PRODUCTS USE CAGE CODE 61081 FOR CATALOGING DIV PENTAIR TECHNICAL PRODUCTS | | APR307AU5 | 62372 | PRECISE OF CALIFORNIA DIV OF ADJUSTABLE BUSHING CORP | | 335-13104 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 53158496895 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MILB857TYPEA | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35691-15 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 317 OR STEEL COMP 347 OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 5 STYLE AND A CONDITION | | NUT HEIGHT | 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNF | | THREAD QUANTITY PER INCH | 24 |
|
|