|
|
|
National Stock Number:
5310-00-849-7172
Federal Supply Class:
5310
National Item Identification Number:
008497172
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 840675-1 | 2H631 | TE CONNECTIVITY CORPORATION | | 97210 | 73734 | FEDERAL SCREW PRODUCTS INC. | | 97210ADX | 1VN02 | AIRDALE EXPRESS LLC | | FF-W-92B TYPE A CLASS E | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.140 INCHES NOMINAL | | OVERALL DIAMETER | 0.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | TIN OVERALL | | THICKNESS | 0.018 INCHES NOMINAL |
|
|