| DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.215 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.138 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE SHELL |
| MATERIAL | PLASTIC POLYAMIDE (NYLON) LOCKING INSERT |
| MATERIAL | STEEL COMP 1010 SHELL |
| MATERIAL | STEEL COMP 1212 NUT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| NUT HEIGHT | 0.136 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| NUT LENGTH | 0.471 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE WIDTH | 0.251 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| PLATE THICKNESS | 0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SHELL |
| TEMP RATING | 120.0 CELSIUS NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNC |
| THREAD QUANTITY PER INCH | 40 |