|
|
|
National Stock Number:
5310-00-851-2242
Federal Supply Class:
5310
National Item Identification Number:
008512242
Description:
WASHER,SHOULDERED AND RECESSED
Detail:
A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
|
Manufacturer Information:
| MS75009 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS75009-5 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | VBE616B1 | H0203 | THALES NEDERLAND B.V. |
|
Techincal Specification:
| HOLE DIAMETER | 0.201 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-700 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.031 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | RECESS ANGLE | 60.0 DEGREES NOMINAL | | SHOULDER DIAMETER | 0.463 INCHES MINIMUM AND 0.468 INCHES MAXIMUM | | SHOULDER HEIGHT | 0.156 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDERED AND RECESSED | | SURFACE TREATMENT | CADMIUM OR ZINC AND CHROMATE OVERALL |
|
|