|
|
|
National Stock Number:
5310-00-861-1406
Federal Supply Class:
5310
National Item Identification Number:
008611406
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 5310008611406 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 590GB1127 | 76040 | MACK TRUCKS INC PARTS OPN | | GA7716 | 01843 | AMBAC INTERNATIONAL CORPORATION | | 7748837 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | GA7716 | 99066 | AMBAC INDUSTRIES INC |
|
Techincal Specification:
| MATERIAL | COPPER OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.382 INCHES MINIMUM AND | | 0.387 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.748 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.062 INCHES MINIMUM AND | | 0.066 INCHES MAXIMUM | | HARDNESS RATING | 40.0 ROCKWELL F NOMINAL |
|
|