|
|
|
National Stock Number:
5310-00-866-6880
Federal Supply Class:
5310
National Item Identification Number:
008666880
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 32B1307-1 | 80206 | NAVAL AIR DEVELOPMENT CENTER WARMINSTER NAVAIRSYSCOM HQ |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | ROUND FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 0.380 INCHES NOMINAL | | FLANGE THICKNESS | 0.057 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OVERALL | | NOMINAL THREAD SIZE | 0.138 INCHES | | NUT DIAMETER | 0.187 INCHES NOMINAL | | NUT STYLE | SLEEVE | | NUT LENGTH | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | SPECIAL FEATURES | ONE EDGE OF FLANGE DIA CHAMFERED 0.031 IN. | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES | UNC |
|
|