|
|
|
National Stock Number:
5310-00-870-2739
Federal Supply Class:
5310
National Item Identification Number:
008702739
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 37B200242P101 | 07482 | GENERAL ELECTRIC COMPANY | | 37B200242P101 | 24446 | GENERAL ELECTRIC COMPANY | | 37B200242P101 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5516 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | OUTSIDE DIAMETER | 0.480 INCHES MINIMUM AND | | 0.500 INCHES MAXIMUM | | OVERALL HEIGHT | 0.135 INCHES MINIMUM AND | | 0.155 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.005 INCHES MINIMUM AND | | 0.009 INCHES MAXIMUM | | SPECIAL FEATURES | OD FLAT ON ONE SIDE,0.190 IN. MIN AND 0.210 MAX FROM CENTERLINE OF HOLE,ONE END TAPERED 81-83 DEGREE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99207 | | DESIGN CONTROL REFERENCE | 37B200242P101 |
|
|