|
|
|
National Stock Number:
5310-00-871-8367
Federal Supply Class:
5310
National Item Identification Number:
008718367
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 251151 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 251151 | 34830 | ROGERSON KRATOS | | 251151 | 77445 | RTX CORPORATION | | 634419 | 77445 | RTX CORPORATION | | 634419 | S0554 | TOKYO JUDOGI KOGYO CO. | | 251151 | S0554 | TOKYO JUDOGI KOGYO CO. | | 6863332-3 | 73342 | ALLISON TRANSMISSION INC | | FF-W-92B | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 6863332-3 | K0680 | ROLLS-ROYCE AIRLINES | | EU20637 | K0680 | ROLLS-ROYCE AIRLINES |
|
Techincal Specification:
| MATERIAL | STEEL COMP 420 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.197 INCHES MINIMUM AND | | 0.210 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.440 INCHES MINIMUM AND | | 0.453 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.100 INCHES NOMINAL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | HEAT TREATMENT | AS FABRICATED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73342 | | DESIGN CONTROL REFERENCE | 6863332-3 |
|
|