|
|
|
National Stock Number:
5310-00-872-9384
Federal Supply Class:
5310
National Item Identification Number:
008729384
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1669-35 | 13002 | GOODRICH CORPORATION | | 1669-35 | 6K4C8 | GOODRICH CORPORATION | | 2571070 | 13002 | GOODRICH CORPORATION | | 2571070 | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2571070 | 55284 | HONEYWELL INTERNATIONAL INC. | | 2571070 | 6K4C8 | GOODRICH CORPORATION | | 32-41690-3 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6370 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | CENTER HOLE SHAPE STYLE | ROUND W/FLATS | | HOLE DIAMETER | 0.767 INCHES MINIMUM AND | | 0.772 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | DEE | | WIDTH | 1.152 INCHES MINIMUM AND | | 1.155 INCHES MAXIMUM | | OVERALL DIAMETER | 1.250 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.120 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76301 | | DESIGN CONTROL REFERENCE | 32-41690-3 |
|