|
|
|
National Stock Number:
5310-00-927-4153
Federal Supply Class:
5310
National Item Identification Number:
009274153
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10168492 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2813699-103 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS | | 306-001-0006 | 70318 | ALLMETAL SCREW PRODUCTS CORP | | 306-001-0006 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 306-001-0006 | C1834 | KONTRON AG | | 306-001-0006 | U1101 | FRACTIONAL H P MOTORS CO LTD C/O DEN S FERRANTI METERS LTD |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 304 OR | | STEEL COMP 316 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.143 INCHES MINIMUM AND | | 0.153 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.248 INCHES MINIMUM AND | | 0.258 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.011 INCHES MINIMUM AND | | 0.021 INCHES MAXIMUM |
|
|