|
|
|
National Stock Number:
5310-00-927-9547
Federal Supply Class:
5310
National Item Identification Number:
009279547
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 105835 | 81873 | WOODWARD HRT INC |
|
Techincal Specification:
| THREAD SERIES | UN | | NOMINAL THREAD SIZE | 1.875 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE FILM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.115 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM | | NUT DIAMETER | 2.360 INCHES MINIMUM AND | | 2.390 INCHES MAXIMUM | | NUT THICKNESS | 0.310 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 4 | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | SPECIAL FEATURES | DRILLED FOR LOCKWIRE THROUGH ONE WALL OF EACH DRIVE POINT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81873 | | DESIGN CONTROL REFERENCE | 105835 |
|
|