|
|
|
National Stock Number:
5310-00-930-0189
Federal Supply Class:
5310
National Item Identification Number:
009300189
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 697830 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR | | MIL-S-6049 COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 55.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.490 INCHES MINIMUM AND | | 0.500 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.760 INCHES MINIMUM AND | | 0.770 INCHES MAXIMUM | | OVERALL HEIGHT | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | RECESS DIAMETER | 0.725 INCHES MINIMUM AND | | 0.735 INCHES MAXIMUM | | RECESS DEPTH | 0.051 INCHES MINIMUM AND | | 0.071 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99167 | | DESIGN CONTROL REFERENCE | 697830 |
|
|