|
|
|
National Stock Number:
5310-00-930-6897
Federal Supply Class:
5310
National Item Identification Number:
009306897
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 696663-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OR | | ALUMINUM ALLOY 6061 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 T3 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-A-250/4,T44 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-A-250/11,T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.550 INCHES MINIMUM AND | | 0.570 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | DEE | | WIDTH | 0.705 INCHES MINIMUM AND | | 0.735 INCHES MAXIMUM | | OVERALL DIAMETER | 0.770 INCHES MINIMUM AND | | 0.790 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.023 INCHES MINIMUM AND | | 0.027 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99193 | | DESIGN CONTROL REFERENCE | 696663-1 |
|
|