|
|
|
National Stock Number:
5310-00-930-7013
Federal Supply Class:
5310
National Item Identification Number:
009307013
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1229-W-1505-Z | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | 195-33 | 10988 | CNH INDUSTRIAL AMERICA LLC | | 195-533 | 10988 | CNH INDUSTRIAL AMERICA LLC | | 4B4280 | 11083 | CATERPILLAR INC | | 275-011 | 72741 | DORMAN PRODUCTS, INC. | | 312-014 | 72741 | DORMAN PRODUCTS, INC. | | S670 | 15434 | CUMMINS INC. | | DW458 | 28835 | HOBART BROS CO | | 925-014 | 72741 | DORMAN PRODUCTS, INC. | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 4B4280 | U3363 | CATERPILLAR TRACTOR CO LTD |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.531 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.062 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.094 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11083 | | DESIGN CONTROL REFERENCE | 4B4280 |
|
|