|
|
|
National Stock Number:
5310-00-933-4844
Federal Supply Class:
5310
National Item Identification Number:
009334844
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-41-38C4 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.711 INCHES MINIMUM AND 0.721 INCHES MAXIMUM | | HOLE DIAMETER | 0.641 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6435 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 240 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE TREATMENT | CADMIUM OVERALL | | TOP RECESS ANGLE | 89.5 DEGREES MINIMUM AND 90.5 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 0.711 INCHES MINIMUM AND 0.721 INCHES MAXIMUM |
|
|