|
|
|
National Stock Number:
5310-00-936-0422
Federal Supply Class:
5310
National Item Identification Number:
009360422
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 547279 | 1RRL5 | NIELSEN HARDWARE CORPORATION | | 547279 | 34830 | ROGERSON KRATOS | | 547279 | 77445 | RTX CORPORATION | | 547279 | 98003 | NIELSEN HARDWARE CORP | | 547279 | JA269 | TOKYO JUDOI KOGYO K.K. | | 547279 | S0554 | TOKYO JUDOGI KOGYO CO. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OR | | STEEL COMP 8630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR | | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE AND | | 66 FED STD 2ND MATERIAL RESPONSE OR | | AMS 6355 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.276 INCHES MINIMUM AND | | 0.286 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.035 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | HEAT TREATMENT | AS FABRICATED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 547279 |
|
|