|
|
|
National Stock Number:
5310-00-937-0454
Federal Supply Class:
5310
National Item Identification Number:
009370454
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 004-003005-027 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 04-0060 ITEM NO 68 | 20019 | WARD LEONARD CT LLC | | 596-6391395 FIND 14 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6391395 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5310PL0994424 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 346-10048 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | D320448 NO 111 | 3X894 | CONTROL FLOW, INC. | | D320448 NO 130 | 3X894 | CONTROL FLOW, INC. | | E101286 PC NO 68 | 3X894 | CONTROL FLOW, INC. | | E102170 PC NO 6 | 3X894 | CONTROL FLOW, INC. | | E102170 PC NO 68 | 3X894 | CONTROL FLOW, INC. | | E103972 NO 68 | 3X894 | CONTROL FLOW, INC. | | E104459 NO 68 | 3X894 | CONTROL FLOW, INC. | | 886338 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | SPP51-0013 | 20019 | WARD LEONARD CT LLC | | WG105386 | 3X894 | CONTROL FLOW, INC. | | WSHR-S-002763 | 55316 | LOCKHEED MARTIN CORPORATION | | MS35338-146 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35338-146 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35338-89 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | WG107386 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.763 INCHES MINIMUM AND 0.783 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.271 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL THICKNESS | 0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303SE OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL | | NONDEFINITIVE SPEC/STD DATA | 2 STYLE AND C CLASS | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|