|
|
|
National Stock Number:
5310-00-938-8387
Federal Supply Class:
5310
National Item Identification Number:
009388387
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121858 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 303887 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 507295 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 4034520 | 28528 | ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST | | 4034520 | 31550 | L3HARRIS TECHNOLOGIES, INC. | | 4034520 | 31633 | ALINABAL HOLDINGS CORPORATION | | 9654M24P01 | 07482 | GENERAL ELECTRIC COMPANY | | MS9549-10 | 0U583 | SAE INTERNATIONAL | | 507295 | 7X677 | GENERAL MOTORS LLC | | MS9549-10 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | 5310PL0212555 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5310PL0832807 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS9549-10 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 938.75.11.350 | S4080 | PILATUS AIRCRAFT LTD | | MS9549-10 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.276 INCHES NOMINAL | | OVERALL DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 321 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE FINISH | 63.0 MICROINCHES BOTTOM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
|
|